This sanitary processor is ideal for larger vessels looking to install a luxury toilet with a custom style and color. It features an electric macerator and pump, allowing the use of a standard household toilet on the boat .so that a normal household toilet can be used on board.
The BoatSanitary Processor can be easily connected to a standard toilet, using a 102mm diameter hose (with a minimum drop of 50mm per metre). When the toilet is flushed, the Sanitary Processor will collect the contents, macerate them and pump the resulting sludge into a holding tank or directly into the water, through a hose just 19mm in diameter. The whole process takes between 10 and 30 seconds and operates almost silently. In the unlikely event of a blockage, the unit can be easily cleaned by removing the inspection cover. Connection hoses should be watertight.
Dimensions 420 mm length - 120 mm width - 360 mm height. The sanitary tank can be located a maximum of 4 m above the sanitary processor.
Macerator diameter 98 mm. Approximate pump capacity 50 L/min at 4 m height.
Maximum permissible water temperature 35ºC
Connections: tube from toilet to sanitary processor Ø 102 mm - maximum length 4 m
Pipe from sanitary processor to sanitary tank: Ø 19 mm - maximum length 20 m. Sink/bidet connections Ø 40 mm
