18-meter-high windmill for water extraction . Sustainable and efficient wind pumping system, renewable energy for water extraction, windmill for rural areas
It has 1 direct transmission shaft, all moving points with significant stress are supported by high quality ball bearings and lifetime lubrication.
The wheel is 7 metres in diameter with 27 steel blades. It has 2 round platforms with 1 metre safety railings and access stairs.
The set has 1 safety system for automatic disorientation for excessive winds and manual brake at the foot of the tower with tensioning winch.
Nominal power 12,340 watts at 12m/s.
The self-supporting tower has a square base measuring 3.59 metres on each side and 18 metres high.
The pumps used in this model are made of stainless steel, and the piston has 1 acrylonitrile butadiene rubber cup. The pumped flow rates will depend on the total load that the pump must support.
The water pipes and inner rods are made of galvanised or stainless steel depending on the type of water to be pumped. They are used in 6 metre sections.
In case of having to raise the water more than 12 meters above the ground level (or equivalent manometric height) where the mill is installed, a stuffing box must be used which is made of bronze and stainless steel.
Windmills painted in green, yellow and red, following the instructions of various environmental and natural park specialists.
The quality of the paint guarantees a wide resistance to high humidity conditions, maritime environment and extreme climates. (1 coat of 2-component epoxy primer and 1 coat of 2-component acrylic polyurethane enamel)
REMARKS: PRICE DOES NOT INCLUDE EXTRACTION PUMP OR RODS. REQUEST A QUOTE.
PACKAGING AND SHIPPING COSTS NOT INCLUDED.
Delivery time: please consult
