Windmill for water extraction 15 meters high. Wind pumping system, renewable energy for water extraction , windmill for rural areas
This windmill for water extraction has 1 direct drive shaft, all moving points with significant stresses are supported by high quality ball bearings and lifetime lubrication.
The wheel is 5 meters in diameter with 24 steel blades.
The set has 1 safety system for automatic disorientation for excessive winds and manual brake at the foot of the tower with tensioning winch.
Nominal power 6,200 watts at 12m/s.
The self-supporting tower has a square base measuring 3.02 metres on each side and 15 metres high. With a round platform measuring 2.13 metres in diameter and with a 1 metre safety railing and access ladder.
The pumps used in this model are made of stainless steel, and the piston has 1 acrylonitrile butadiene rubber cup. The pumped flow rates will depend on the total load that the pump must support.
The water pipes and inner rods are made of galvanised or stainless steel depending on the type of water to be pumped. They are used in 6 metre sections.
In case of having to raise the water more than 10 meters above the ground level (or equivalent manometric height) where the mill is installed, a stuffing box must be used which is made of bronze and stainless steel.
Windmills painted in green, yellow and red, following the instructions of various environmental and natural park specialists.
The quality of the paint guarantees a wide resistance to high humidity conditions, maritime environment and extreme climates. (1 coat of 2-component epoxy primer and 1 coat of 2-component acrylic polyurethane enamel)
OBSERVATIONS: PRICE DOES NOT INCLUDE EXTRACTION PUMP OR RODS. REQUEST A QUOTE.
PACKAGING AND SHIPPING COSTS NOT INCLUDED
Delivery time: please consult
