Flexible drinking water tankfor boats , camper caravans , camper motorhomes , vans , boats , motorhomes and trucks
Flexible drinking water tanks can be installed quickly and easily; they adapt to the place they are intended for, even if it is not easily accessible. Normally, no other accessories are necessary for fixing them. In fact, the inlet and outlet fittings are the only ones that need to be mounted. The joints are not only welded, but are also reinforced inside for enormous resistance. This allows flexible water tanks to withstand significant pressures, especially overpressures caused by strong rocking. This is why this reinforcement is essential.
Each flexible drinking water tank has two right-angle fittings as standard: one for connecting the filling tube (38 mm Ø ) and the other for the pump tube (16 mm Ø ). The filling fitting is mounted on the top of the water tank and the other is supplied loose for easy mounting in the desired position. Additional fittings can be supplied as an option.
The fabric used to make flexible water tanks consists of three layers: 1. a wear-resistant layer. 2. a reinforcement layer. 3. a tasteless layer.
Flexible water tank measurements:
55 litre flexible tank in square format: 680 mm x 780 mm. Full height 250 mm (approx.)
70 litre flexible tank in square format: 780 mm x 780 mm. Full height 270 mm (approx.)
Flexible 100 litre tank in Square format: 790 mm x 1000 mm. Full height 270 mm (approx.)
Flexible 100 litre tank in Triangular format: 1170 mm x 1490 mm. Full height 240 mm (approx.)
160 litre flexible tank in square format: 790 mm x 1420 mm. Full height 270 mm (approx.)
220 litre flexible tank in square format: 740 mm x 2040 mm. Full height 270 mm (approx.)
